 |
Gravity can be used when there is ample elevation difference from an
overhead conveyor to the filler infeed. Gravity rinsers are used for
metal cans or similarly shaped non-metal containers. Containers are put
into an inverted position with rod work twist fittings. After being
rinsed, they are re-inverted to the correct orientation to the filler.
- Water rinsers include a length of track for water to drain out
of the container after rinsing.
- Ionized air rinsers re-invert the container immediately after
rinsing.
Water Rinsers utilize water spray nozzles which are attached to a common
manifold to direct water to the inside of the container.
Ionized Air Rinsers utilize a series of air nozzles which spray ionized
air into the container to neutralize static electricity that may be
holding any foreign debris to the inside of the container. A second set
of air nozzles spray filtered air into the container to blow out any
foreign debris. A remote vacuum system removes debris from the rinser
hood and is collected into a canister. |